台灯安装说明书英文，请帮忙翻译下

极力推荐你按照编号的步骤依次进行安装!
打开包装箱,核查灯具和安装附件是否齐全;2.将小套圈推到支架上端,用手握住支架下部, 用力向内压使其下部缩小,卡入支架座内,松 开支架,并让小套圈滑下套在支架座下;3.安装灯具所指定型号灯泡(灯具内不包含灯泡);4.将灯罩放在支架顶端,并用收装饰头旋紧;5.将水晶安装在灯体上
6.将灯具插头完全插入插座;
7.安装完成,重新合上电源.灯具的清洁(请断开电源)1.灯体请使用软布擦拭灰尘.2.严禁使用砂纸和钢丝刷等 对灯具进行清洁.

Highly recommend you according to the number of steps in sequence for installation. Open the packing cases, examine whether the lamps and lanterns and installation accessories is complete; 2. The small ring on the upper bracket, and holding stents lower in hand, make an effort to internal pressure that the lower part of the narrow, card into the bracket seat, frame, loose spending and make the small ring down set under the bracket seat; 3. Install lamps and lanterns of specified type bulb (lamps and lanterns does not contain light bulb); 4. The chimney on the top of the scaffold, and decorate head with closed tight; 5. Install the crystal on the lamp body 6. Insert the plug completely of lamps and lanterns socket; 7. The installation is complete, close to the power supply. The cleaning of lamps and lanterns please disconnect the power supply () 1. The lamp body, please use soft cloth to wipe dust. 2. It is strictly prohibited to use sand paper and steel wire brush, etc To clean lamps and lanterns.

搜一下：台灯安装说明书英文，请帮忙翻译下