Wake#在主板上是什麼信号？
答案:1 悬赏:20 手机版
解决时间 2021-03-09 10:09
- 提问者网友：杀手的诗
- 2021-03-09 06:22
Wake#在主板上是什麼信号？
最佳答案
- 五星知识达人网友：不甚了了
- 2021-03-09 07:49
参与上电复位的信号，低电平时有效，通知调制解调器或数据集就绪OK，多见于IO 芯片W83627EHF中的52脚DTRA#/GP64(PENROM)
官方原英文说明如下
UART A Data Terminal Ready. An active low signal informs the
modem or data set that the controller is ready to communicate.
During power-on reset, this pin is pulled down internally and is
defined as PENROM disable, which provides the power-on value
for CR24 bit 1 (ENROM). A 1 kΩ is reserved to pull down and a
1 kΩ resistor is recommended if intends to pull-up to enable
官方原英文说明如下
UART A Data Terminal Ready. An active low signal informs the
modem or data set that the controller is ready to communicate.
During power-on reset, this pin is pulled down internally and is
defined as PENROM disable, which provides the power-on value
for CR24 bit 1 (ENROM). A 1 kΩ is reserved to pull down and a
1 kΩ resistor is recommended if intends to pull-up to enable
我要举报
如以上问答信息为低俗、色情、不良、暴力、侵权、涉及违法等信息，可以点下面链接进行举报！
大家都在看
推荐资讯