求高手把这个公式修改成通达信盘中选股

请高手依分时指标改写一个通达信盘中选股公式~~~~~
盘中只要出现过（有庄）的股票都能选出来。

下面是通达信分时源码

{分时控盘}
VAR1:=EMA(EMA(CLOSE,13),13);
控盘:=(VAR1-REF(VAR1,1))/REF(VAR1,1)*1000;
STICKLINE(控盘<0,控盘,0,1,1),COLOR00FF00;
STICKLINE(控盘>REF(控盘,1) AND 控盘<0,控盘,0,1,1),COLORFF00FF;
无庄控盘:=控盘<0;
STICKLINE(控盘>REF(控盘,1) AND 控盘>0,控盘,0,1,1),COLOR0000FF;
有庄控盘:=控盘>REF(控盘,1) AND 控盘>0;
VAR2:=100*WINNER(CLOSE*0.95);
STICKLINE(控盘0,控盘,0,1,1),COLORFFFF00;
主力出货:=控盘0;
STICKLINE(VAR2>50 AND COST(85)0,控盘,0,1,1),COLOR00FFFF;
高度控盘: VAR2>50 AND COST(85)0,COLOR00FFFF,LINETHICK2;
A10:=CROSS(控盘,0);
控盘B:=FILTER(IF(A10,1,0),5);
{分时价格原码}
JJ:=DYNAINFO(11);
{波段买卖原码}
P:=55;S:=8;M1:=3;
财:=(EMA(CLOSE,S)-EMA(CLOSE,P))*10,COLORRED,LINETHICK2;
神:=EMA(财,M1),COLORGREEN,LINETHICK1;
DRAWBAND(财,RGB(255,0,0),神,RGB(0,100,50));
{股价与均线偏离买卖条件}
BTJ1:=(C-JJ)/JJ<-0.03;
BTJ11:=(C-JJ)/JJ<-0.03;
BTJ12:=LAST(JJ>=REF(JJ,1),5,1) AND (C-JJ)/JJ<0.005;
STJ1:=(C-JJ)/JJ>0.005;
{控盘买卖条件}
STJ01:=控盘0.5;
STJ02:=控盘>0;
BTJ2:=控盘>REF(控盘,1) AND 控盘<-0.2;
BTJ22:=控盘>REF(控盘,1) AND 控盘<0 ;
{波段买卖条件}
BTJ3:=CROSS(财,神) AND 财<-0.3;
BTJ32:=CROSS(财,神) AND 财<-0.1;
STJ31:=CROSS(神,财);
STJ32:=CROSS(神,财) AND 财>1.618;
{以下为信号};
BTJ81:=FILTER(BTJ1 AND BTJ2 AND BTJ3,13);
BTJ811:=FILTER(BTJ11 AND BTJ2 AND BTJ3,13);
BTJ82:=FILTER(BTJ12 AND BTJ22 AND BTJ32,13);
DRAWTEXT(BTJ81,神,'↑买底'),COLORRED;
DRAWTEXT(BTJ811,神*1.2,'↑有庄'),COLORWHITE;
STJ81:=FILTER(STJ1 AND STJ01 AND STJ31,13);
STJ82:=FILTER(STJ02 AND STJ32 ,13);
STJ83:=STJ81 AND STJ82;
DRAWTEXT(STJ83,神,'↓卖'),COLOR00FF00;
DIFF: (EMA(CLOSE,8) - EMA(CLOSE,55))*10,COLORRED;
DEA: EMA(DIFF,3),COLORGREEN;
庄:= BTJ11 AND BTJ2 AND BTJ3;
有庄:FILTER(庄,55),COLORWHITE;
DRAWTEXT(BTJ811,有庄,'有庄'),COLORWHITE;

VAR1:=EMA(EMA(CLOSE,13),13);
控盘:=(VAR1-REF(VAR1,1))/REF(VAR1,1)*1000;
JJ:=DYNAINFO(11);
P:=55;S:=8;M1:=3;
财:=(EMA(CLOSE,S)-EMA(CLOSE,P))*10,COLORRED,LINETHICK2;
神:=EMA(财,M1),COLORGREEN,LINETHICK1;
BTJ11:=(C-JJ)/JJ<-0.03;
BTJ2:=控盘>REF(控盘,1) AND 控盘<-0.2;
BTJ3:=CROSS(财,神) AND 财<-0.3;
庄:= BTJ11 AND BTJ2 AND BTJ3;
有庄:FILTER(庄,55),COLORWHITE;

通达信不能盘中选股，别浪费精神了

你怎么老是要求选股公式啊？加我qq吧   v1:=ema(close,60)-ema(close,300); v2:=ema(v1,300); v3:=(close-llv(low,8))/(hhv(high,8)-llv(low,8))*100; v6:=close/ref(close,3)>=1.1; v7:=backset(v6,3); v10:=peakbars(3,15,1)<10; v12:=if(v10=1,50,0); 头部:= if(v12=50,100,0); v9:=troughbars(3,15,1)<10; v11:=if(v9=1,50,0);