junipernetscreen5gt如何恢复出厂设置

junipernetscreen5gt如何恢复出厂设置

Juniper NetScreen-5GT 重置设备到出厂默认设置

上一篇 / 下一篇 2009-03-04 08:54:54

查看( 764 ) / 评论( 0 ) / 评分( 0 / 0 ) 如果管理员密码丢失，您可以使用下列程序重置的NetScreen设备的默认设置。the configurations will be lost, but access to the device will be restored.配置将丢失，但存取装置将被恢复。to perform. this operation, you need to make a console connection, which is described in "connecting via the console port" on page 3-22.以执行此作业，您需要一个控制台连接，这是描述的“连接通过控制台端口”页上的3月22日。

by default the device recovery feature is enabled.默认情况下，该装置恢复功能已启用。you can disable it by entering the unset admin device-reset command.您可以禁用它进入取消管理设备重置命令。

1.at the login prompt, type the serial number of the device.1.at登录提示符下，键入序号设备。

2.at the password prompt, type the serial number again.2.at密码提示，输入序列号了。

the following message appears:将出现以下消息：

!!!！lost password reset/!!丢失密码重置/ ！you ha ye initiated a command to reset the device to factory defaults, clearing ah current configuration, keys and settings.您公顷叶发起了一项命令重置设备到出厂默认设置，当前配置信息啊，键和设置。would you like to continue?您要继续吗？y/in!是/在！

3.press the y key.3.press的Y键。

the following message appears:将出现以下消息：

!!！reconfirm lost password reset 111fyou continue, the entire configuration of the devlce will be erased.确认丢失密码重置111fyou继续，整个配置devlce将会被删除。in addition, a permanent counter will be incremented to signify that thls device has been reset.此外，一个永久性反将递增，以表明thls设备已重置。this is your last chance to cancel this command.if you proceed, the device will return to factory default configuration, which is: system ip: 192.188.1.1; username: netscreen;password' netscreen.这是你最后一次机会，以取消此command.if操作，设备将恢复到出厂默认配置，即：系统的IP地址是： 192.188.1.1 ;用户名：的NetScreen ;密码'的NetScreen 。would you like to continue?y/[n]您要继续吗？是/的[ ]

4.press the y key to rest the device.4.press的Y关键其余设备。

you can now login in using netscreen as the default username and password.现在，您可以登录使用的NetScreen作为默认的用户名和密码。