氟碳喷涂的铝主梁油漆碰伤怎么处理

氟碳喷涂的铝主梁油漆碰伤怎么处理

9, electrical control system
1, general requirements
a, electrical control of centralized control by way of partition, which is based pre-treatment, painting, hanging chain, electrophoresis and control cabinet after washing, drying and curing control cabinet.
b, distribution: a distribution by the user is responsible for the secondary distribution by the supplier is responsible.
c, electrophoretic control cabinet with all the electrical appliances on / off switch, the working status indicator.
d, the system alarm: When the device during operation, once the abnormal condition, alarm system automatically starts and the form of audio prompts field staff which sets an equipment failure and lead to exclusion.
e, all operating positions with tight stop button, and ensure that in case of emergency, the emergency stop line of work, to prevent major accidents occur.
f, other countries did not state Department meet the latest standards.
2, the specific way of implementing the control cabinet
a, electrophoresis, and after the flushing control cabinet: Electrophoresis silicon rectifier input voltage 380V, 50Hz three-phase. Rectifier output voltage: DC 0-250V, current adjustable DC 0-250A.
b, hanging chain conveyor system, and Spray control cabinet: power lines and control lines separately from the installation, all the operator position with stop / start button, hanging chain, designed to run alarm bells across the board.
c, control cabinet drying: the temperature of each control point (such as oven temperature) of the temperature measurement and control functions, oven temperature control precision was ± 5 ℃. Motor load and temperature gauge, etc. had trouble with sound, light alarm, and can find fault processing.
3, the reliability measures
1), the use of advanced te