吸入口英语怎么说,帮忙翻译成英文

吸入口英语怎么说,帮忙翻译成英文

4, device structure shows
a, the system consists of 10 processing station, three sets of heating devices, emission devices, and manual and automatic temperature control, electronically controlled automatic spray composed of co-washing machine.
b, unit structure of the chamber body, tank, pumps, valves, piping, nozzles, insulation and ventilation system, etc..
c, room spray body design is divided into paragraphs and transition, with anti-series between the Dan liquid baffle, similar processes with the adjacent water washing up a骇ainst the technology, from the washing process ensures the effectiveness and save water. Spray pre-treatment units to eliminate entire run, run, drop, leakage and so on.
d, spray chamber body through all the pre-treatment station, the entire room with 1.2mm stainless steel production body. The frame is square tube production, heat insulation structure section are used, insulation board is 0.8mm stainless steel jacket.
e, tank 3.0mm thick stainless steel plate. All tanks are heating section heat treatment, insulation thickness 50mm, high quality rock wool insulation panels, insulation layer 0.8mm stainless steel jacket.
f, Liquid Tank main body design, the Deputy slot structure and cover in the slot and the slot located between the water seal device, set the upper sump overflow ports and water supply port, bottom tilt and stainless steel with double-layer filter, to prevent debris into the pump. The lowest position in the tank equipped w......余下全文>>