英翻中：今天晚上!1.exhaust silencera.exhaust noise attenuation shall

英翻中：今天晚上!
1.exhaust silencer
a.exhaust noise attenuation shall be provided to satisfy the following requirements:In accordance with requirements of the central Pollution Control Board(latest notification)
b.The silencer shall be manufactured from steel and shall have flanged connections.
c.The silencer shall be supported from the DG canopy structure with help of flexible coupling in exhaust pipeline so that there is no stress imposed on the engine.
d.Emission shall be compliance to CPCB emission norms of MOE.
2.Insulation and sheathing
a.Insulation and sheathing shall be provided over all exhaust piping including the silencer.
b.Insulation shall be adequately rated and sized to limit the sheathing temperature to no more than 75℃ at full load.Insulation shall be glass wool type with a temperature rating not less than 550℃.
c.Sheating shall be 1.2mm minimum sheet ,machine folded and with suitable bolted clamps for securing to the insulation.
7.Rating Plate
The rating place shall be of corrosion resistant metal and shall be fixed by screws to the stator and exciter frame.The plates shall include all the information specified in the relevand Standards.
8.Over speed:
Generators shall be capable of withstanding,without mechanical damage or permanent distortion,the over speed requirements of the prime mover.
9.Vibration
The amplitude of vibration shall not exceed the values specified.
10.Finish
All Components shall be fully tropicalised.
The canopy external surface shall be powder coated with Ivory White Finish Colour.
The Seller shall supply a quantity of paint for field ‘touch up’.
11.Special Tools:
All special tools including shims etc.,which are required for installation and maintenance shall be supplied with the equipment.

1.尾气遏声器 a.尾气噪声稀释将被提供满足以下要求:与中央污染控制Board(latest 通知的要求符合) b .遏声器将是制作的从钢,将有被安装边缘的连接.c .遏声器将支持从DG 机盖结构在灵活的联结帮助下在尾气管道以便没有重音被强加给引擎.d.放射将是服从对CPCB MOE 放射准则.2.绝缘材料和覆盖 a.绝缘材料和覆盖将被提供在所有尾气管道系统包括遏声器.b.绝缘材料将是充分地额定和估量限制覆盖的温度到没有比75?在充分的load.Insulation 将是玻璃棉类型以温度规定值不少于550?.c.Sheating 将是1.2mm 极小的板料,机器被折叠和与适当的被闩上的钳位为绑到绝缘材料上.7.规定值板材 规定值地方将是腐蚀抗性金属,将由螺丝固定对定子并且刺激者frame.The 板材将包括所有信息被指定在relevand 标准.8.Over 速度:发电器将是有能力在承受,没有机械损伤或永久畸变,原动力的结束速度要求上.9.Vibration 高度振动不会超出价值被指定.10.Finish 所有组分将是充分地tropicalised .机盖外在表面将是粉末给套上外套按象牙白色结束颜色.卖主将供应油漆的一个数量为领域` 接触' .11.Special 工具:所有特定工具包括定刀片等,必需为设施和维护将被供应以设备.