高手来翻译

高手来翻译

DP0085/DP0366/DP3150
Hello Andy,
你好，安迪，
How are you?
你好吗
Matt has forwarded to me your Skype conversation you had today.
马特已经将你今天的skype对话转告给我了。
Andy, are you aware of the possible scope of the issue related to material problem?
安迪，你是否知道了关于那个材料问题的可能的（原因）范围？
We are experiencing a high number of returns of DP3150 as well as DP0085/DP0366.
我们正收到很多数量的DP3150，DP0085和DP0366的返货。
The rubber used for all pulleys after the factory move was basically not correctly mixed - unusable, this will include every pulley manufactured in this period?
工厂搬迁后用来生产滑轮的橡胶基本上没正确混合好，（所以）不能用， 这会包括这期间生产的每一个滑轮吗？
Beginning of this week we have received the pulley DP1086 (batch code B1003-96) back under warranty with a massive labour and parts claim £ 780.00. We never had a problem on this reference before!
The installer cannot fit this pulley incorrectly; it is more than likely that the problem is the material … who will pay this claim???
这周开始我们已收到DP1086滑轮的退货，而且在商品保质书规定下，我们付出了一大笔劳力和零件索赔，总计780欧元。我们从来没有这个方面的问题过！ 安装工具与这滑轮不能正确匹配。 最有可能性的问题就在于材料了...（不过）谁会支付这笔赔偿？
We have sent you today OE samples for DP0366 and DP0085.
我们已经将DP0366和DP0085OE样本(订单样本）给你送过去了。
The factory has to re-develop both references as soon as possible, the pulleys are disassembled and I have attached Charlie’s reports regarding the comparison of Tianfa and the OE pulley.
工厂必须重新尽快开发两种产品参考（设计）。滑轮被拆开了，然后我附上了查理的关于tianfa和订单样本比较的报告。
The design is different but is not the reason for the failure as we know, because we had only a small quality issue before (acceptable percentage of warranty returns).
滑轮设计是不同但这不是我们所了解到问题的原因所在， 因为我们曾经仅仅只有过很小的质量问题（是可接受的质保期内返货量的百分比）
But we have realised that OE has a much better design now and the factory has to copy the OE product 100% and get the rubber material right (CR/NR).
不过，我们已经意识到订单滑轮现已有更好的设计，而且工厂也开始采取正确的材料(CR橡胶和NR天然橡胶）按照订单滑轮模型生产。
We are requesting with each delivery a sample of the rubber which has been used for our material analysis (block of injected rubber – sample probe).
我们正请求得到每一笔交货中被分析检查的橡胶样本。（一块被注射过的橡胶-样品探针）