请示多个外网IP组成一个局域网
- 提问者网友：你挡着我发光了
- 2021-07-31 12:41
- 五星知识达人网友：几近狂妄
- 2021-07-31 13:06
A网通过路由器A进入外网，B有路由器B，在A、B路由器间间加路由器C，作为网络隔离，且地址映射，就可轻松实现两网互联
- 1楼网友：摆渡翁
- 2021-07-31 14:14
C:\Documents and Settings\w>arp
Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP).
ARP -s inet_addr eth_addr [if_addr] ARP -d inet_addr [if_addr] ARP -a [inet_addr] [-N if_addr]
-a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. -g Same as -a. inet_addr Specifies an internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -d Deletes the host specified by inet_addr. inet_addr may be wildcarded with * to delete all hosts. -s Adds the host and associates the Internet address inet_addr with the Physical address eth_addr. The Physical address is given as 6 hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies a physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used. Example: > arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry. > arp -a .... Displays the arp table.