pa10t与pbt515有什么区别

pa10t与pbt515有什么区别

1.PA10T temperature of 270 degrees, 310 degrees above the injection temperature. Is a high temperature resistant material, has no reflow discoloration on behalf of SMT foaming grade is typical HTN2GF30 are widely used in SMT industry. Toughness is better than PA46.PA9T.PPS.LCP.
2.PBT 515 is a glass fiber 15% PBT temperature of 150 degrees, the injection temperature of 220 degrees.
Comprehensive consideration, these two are doing for a connector, but PA10T is a high-end connector. PBT can only do the linker ordinary.
More problems can search POLYMSJ
PA10T 耐温为270度，注塑温度310度以上。属高耐温材料，具有可回流焊SMT不起泡不变色典型的代表牌号是 HTN2GF30广泛用于SMT行业。韧性比PA46.PA9T.PPS.LCP 都要好。
PBT 515是含玻纤15%的PBT耐温为150度，注塑温度为220度。
综合考虑，这两款都是做连接器用的，但是PA10T是高端连接器。PBT只能做普通的链接器。