英语翻译1产品在平口过程中,由于产品没有放平,导致端口出现不平整现象,2产品在组装过程中,由于端口胀口后出现材料微量拉伸

英语翻译
1产品在平口过程中,由于产品没有放平,导致端口出现不平整现象,
2产品在组装过程中,由于端口胀口后出现材料微量拉伸,导致出现产品端口高低不平,造成最终产品垂直度超差、延长段超差、全长超差.
纠正措施
1、更改产品加工工艺,加长钢管下料长度、平口长度,为后序生产留有二次平口加工余量
2、在产品组装完成后,增加二次平口工序,用来保证最终产品的端口垂直度、全长和端口延长段尺寸

1.Products in the process of even mouth,Because the product not flat,Cause ports appear uneven phenomenon.
2.Products in the assembly process,Due to the port expansion mouth appeared after material trace overpull,Leads to the ports of the rugged products,The resulting product verticality is poor,Extended segment is very poor,Length is very poor.
Corrective measures
1.Change product processing technology.Lengthen steel pipe materials in length,Even mouth length,For after the production with secondary flat sequence mouth machining allowance.
2.After completion of the product assembly,Adding secondary even mouth process.Used to guarantee the end product of port perpendicularity,lengthAnd port extension section size.