软件功能的英文翻译

In the previous step I explained how to use the Code finder to handle changing locations. But that method alone
makes it difficult to find the address to set the values you want.
Thats why there are pointers:

At the bottom you'll find 2 buttons. One will change the value, and the other changes the value AND the location of
the value.
For this step you dont really need to know assembler, but it helps a lot if you do.

First find the address of the value. When you've found it use the function to find out what writes to that address.
Change the value again, and a item will show in the list. Double click that item. (or select and click on more info) and
a new window will open with detailed information on what happened when the instruction ran.
If the assembler instruction doesnt have anything between a '[' and ']' then use another item in the list.
If it does it will say what it think will be the value of the pointer you need.
Go back to the main cheat engine window (you can keep this extra info window open if you want, but if you close it,
remember what is between the [ and ] ) and do a 4 byte scan in hexadecimal for the value the extra info told you.
When done scanning it may return 1 or a few hundred addresses. Most of the time the address you need will be the
smallest one. Now click on manually add and select the pointer checkbox.

The window will change and allows you to type in the address of a pointer and a offset.
Fill in as address the address you just found.
If the assembler instruction has a calculation (e.g: [esi+12]) at the end then type the value in thats at the end. else
leave it 0. If it was a more complicated instruction look at the calculation.

example of a more complicated instruction:
[EAX*2+EDX+00000310] eax=4C and edx=00801234.
In this case EDX would be the value the pointer has, and EAX*2+00000310 the offset, so the offset you'd fill in
would be 2*4C+00000310=3A8.  (this is all in hex, use cal.exe from windows in scientific mode to calculate)

Back to the tutorial, click OK and the address will be added, If all went right the address will show P->xxxxxxx, with
xxxxxxx being the address of the value you found. If thats not right, you've done something wrong.
Now, change the value using the pointer you added in 5000 and freeze it. Then click Change pointer, and if all went
right the next button will become visible.

extra:
And you could also use the pointer scanner to find the pointer to this address

#： 请不要在翻译软件上复制过来 谢谢！！

在前面的步骤,我解释了如何使用这些代码的发现者处理改变位置。但这种方法 很难发现这个地址,你想要的值。 这就是为什么有指针。 你会发现在底部有2个按钮。一个将会改变,以及其他的变化和所处的位置的值 这个值。 在这一步,你不需要知道汇编,但它有很大帮助,如果你做的。 首先找到地址的价值。当你发现它使用功能,以找出如何写信给那个地址。 改变价值,又一个项目将显示在列表中。双击这个项目。(或选择并点击更多信息) 一个新的窗口将开启的详细信息时发生了什么事指示跑。 如果没有任何的汇编语言指令之间的['和']又用另一项的列表。 如果它是否会说它想要成为这个值的指针,你需要的人。 回到主窗口(你可以欺骗发动机保持这种额外的信息窗口打开时,如果你想要的,但是如果你关闭它, 记住在[和])和4个字节的价值的十六进制的额外信息告诉你。 当完成扫描可以返回1或几百位址。大部分时间,你需要的地址 最小的一个。现在点击手动添加和选择指针复选框。 这个窗口将会改变,允许你输入地址指针和偏移。 填写的地址,你只是发现地址。 如果有一个计算的汇编语言指令(例如:[12])应急服务国际公司+结束之后的价值在这类型的。end 离开这0。如果它是一个更复杂的指令看看计算。 更复杂的例子说明: [EAX * 2 + EDX + 00000310]EAX = = 00801234 4C和EDX)。 在这种情况下EDX会的教鞭,和EAX * 2 + 00000310偏移距、所以你要填写 将2 * 4C + 00000310 = 3A8。(这是所有的巫术,使用cal.exe从窗口在科学的模式来计算)。 回到教程,然后点击OK和地址将补充说,如果一切顺利地址将显示P - > xxxxxxx, 作为地址xxxxxxx珍惜你发现。如果那不对,你做错了事情。 现在,改变你加入使用指针5000和冰冻起来。然后点击变动的指针,如果都去了 对下一步会变得清晰可见。 额外的。 你也可以用鼠标扫描器寻找指向这个地址