我是这样的笔记本电脑，请问我想升级玩3D可以吗，需要更换那些硬件，主 板有PIC插槽的
参数如下：Time of this report: 1/1/2000, 12:02:03
Machine name: PC-20000101UDBD
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
Language: Chinese (Regional Setting: Chinese)
System Manufacturer: HITACHI
System Model: FLORA 270GX
BIOS: Default System BIOS
Processor: Intel Celeron, ~540MHz
Memory: 128MB RAM
Page File: 88MB used, 218MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
---------------
Card name: ATI RAGE Mobility (ACER)
Manufacturer: ATI Technologies, Inc.
Chip type: ATI RAGE Mobility P/M AGP 2X (A21/2)
DAC type: ATI Internal DAC
Device Key: Enum\PCI\VEN_1002&DEV_4C4D&SUBSYS_10101025&REV_64
Display Memory: 8.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Monitor Max Res: 640,480
Driver Name: atidrab.dll
Driver Version: 5.01.2519.5012 (English)
DDI Version: 8
Driver Attributes: Final Retail
Driver Date/Size: 8/31/2001 16:01:52, 382592 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: Mini VDD: atimpab.sys
Mini VDD Date: 8/31/2001 15:23:34, 289664 bytes
Device Identifier: {D7B71EE2-0F0D-11CF-0160-C739CAC2C835}
Vendor ID: 0x1002
Device ID: 0x4C4D
SubSys ID: 0x10101025
Revision ID: 0x0064
Revision ID: 0x0064
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.