急，帮忙把这个涂料的说明书翻译成英文，谢谢

急，帮忙把这个涂料的说明书翻译成英文，谢谢

你娘的。太多了吧.到翻译社翻译出来还得花点钱呢。你倒省事20分就想搞定啊?

Profile : one-component polyurethane waterproof coating also known as wet-cured polyurethane waterproof coating, through the air and moisture curing reaction film. It has excellent mechanical properties, low-temperature properties; Direct construction, film without seams; Drug-free, safe environment; right base moisture adaptable, in relatively wet-surface construction, but also in the relatively high humidity conditions under construction, with the primary good adhesion. Construction Method : 1. Primary treatment : require the formation of the surface and firm, and no floating sand, no water tomorrow. 2. Stir well after the materials used rubber scraper or brush painting, bottoming 3. Brushing the surface : Curing the bottom, - Multi-Brushing level, every times 0 .3-0.4 mm thick, Each painting times with the last vertical direction to enable uniform coating thickness until thickness of the design requirements. 4. Lean spreading carbide : If for vertical construction, the final layer of paint applied but not yet completely finished curing, Lean on its surface clean Sprinkle with a small amount of 2-3mm thick carbide to increase cement mortar coating and adhesive strength. When fully cured coating and acceptance, can be done protective layer of cement mortar or affixed with the traditional method of tile, mosaic, and so on.